Liquid Slip Gel | GLASS

 Liquid Slip Builder Gel
Our Liquid Slip Builder Gel is a high-performance, self-levelling builder designed for smooth overlays, controlled structure, and effortless application.
Formulated with a modern acrylates copolymer base and professional-grade monomers, this gel offers the perfect balance of flow, strength, and flexibility. Its slip consistency allows the gel to move easily under the brush while maintaining enough body to build apex and structure with confidence.

▪︎
Ideal for natural nail overlays and rebalance fills. Liquid Slip Builder Gel delivers a clean, controlled finish with minimal effort!  

▪︎Professional use only▪︎

🔑 Key Features:

• Self-levelling slip consistency
• Smooth, controlled application
• Flexible yet supportive structure
• Suitable for overlays and light structure
• Bottle format for precision and speed

For best comfort use the low heat setting and apply in thin controlled layers.

Removal
File down bulk prior to removal.
Product is soak-off capable when applied in thin layers.
For heavy structure or extensions, file-off removal is recommended.

🔥 Heat Control Application Guide 🔥
UV/LED builder gels cure through an exothermic polymerisation reaction.
Applying controlled layers and curing correctly helps minimise heat spikes and ensures a comfortable service.

•
For best results:
✔ Apply a thin foundation layer and fully cure first to help absorb and distribute heat during subsequent layers
✔ Apply thin, controlled builder layers rather than thick applications
✔ Flash cure for 5–10 seconds when building apex or structure
✔ Use the low heat / soft start mode on professional lamps when available
✔ Allow the client to remove their hand briefly if heat is felt, then continue curing
✔ Avoid placing very thick gel directly in the centre of the nail plate

•
Recommended Professional Technique:

• Prep the natural nails and apply Eco Prep System/Rubber Base layer.
• Apply a thin foundation layer of Liquid Slip Builder Gel.
• Fully cure this layer to create a stable base that helps absorb heat.
• Apply a small bead of builder gel and guide it into the apex and structure.
• Flash cure 5–10 seconds if needed, then complete the full cure cycle.

Curing Times
LED: 60 seconds
UV: 120 seconds
Lamp compatibility: 365–405 nm
Correct lamp power, thin application, and controlled building significantly reduce heat spikes.

•
Professional Notes
HEMA-free
Free from banned TPO (CAS 75980-60-8)
Designed for trained nail technicians
Avoid skin contact. Always cure fully.

Correct curing, glove use, and controlled application are essential. Discontinue use if irritation or sensitivity occurs.

 🔬 Ingredient Transparency

Unlimited Artistry Supplies aims to provide clear documentation and ingredient transparency to help professionals understand the chemistry behind their products.

Ingredient List (INCI | Approx. %)
Acrylates Copolymer — 65–75%
Hydroxypropyl Methacrylate (HPMA) — 20–30%
Ethyl Trimethylbenzoyl Phenylphosphinate — 2–4%
Hydroxycyclohexyl Phenyl Ketone — 2–4%
May contain (colour-dependent):
CI 60725 (Violet 2)
CI 77266 (Carbon Black)
CI 77891 (Titanium Dioxide)
CI 73360 (Red 30)
CI 74160 (Blue 15)
CI 74260 (Green 7)
CI 19140 (Yellow 5)
CI 77019 (Mica)

Professional-use formula. Contains reactive monomers. Avoid skin contact and cure fully.
All gel products are intended for use on the nail plate only. This product is not marketed as a low-sensitisation or sensitive-skin formula

Professional Use Disclaimer

This product is designed exclusively for trained nail technicians and professional salon environments.

UV/LED gel systems cure through a photopolymerisation reaction, where liquid acrylate monomers transform into a hardened polymer structure when exposed to UV/LED light. During this natural curing process, a temporary warming sensation may occur.

This sensation, commonly referred to as a heat spike, can occur with all UV/LED gel systems and is a normal part of polymerisation. A brief heat spike does not indicate a poor-quality or faulty formula.

The level of warmth experienced during curing can vary depending on factors such as application thickness, nail plate sensitivity, lamp intensity, and curing conditions.

Professional application techniques, controlled product placement, and proper curing practices help minimise heat spikes and ensure optimal performance.

Open link to view full SDS:

https://cdn.shopify.com/s/files/1/0946/4732/0874/files/Liquid_Slip_Gel_SDS.PDF?v=1771415633